You occasionally are unable to beat the flex charger. The cord has the same connector on both sides, one side plugs into the beats, but you are not sure what to plug the other side into since neither the computer nor any other power source will fit it. Here are the steps for you to follow.
Table of Contents
How to Beats Flex Charger?
There are three easy ways to beats the flex charger.
Turn Your Earphones Off.
Press the Power button on the right control module (it resembles a box that is located along the cord).
- If the headphones are on, a light on the Power button will show you how much battery life is still left. A white light indicates that there is more than an hour left, a red light indicates that there is less than an hour left, and a blinking red light indicates that your Beats Flex needs to charge.
- Any lights on it ought to go out to signal that it is off.
Plug the USB-C Cable into the Port on the Other Control Module.
When you initially purchased the earphones, this cable was also included. However, if you don’t have the original cable, any electronics store will have a USB-C cable to beats the flex charger.
- With that USB-C cable, you ought to be able to charge your earbuds if you have an Android phone or tablet.
Connect the Other End to a Power Source Or Adapter.
If your MacBook Pro has a USB-C port for charging, you can connect the other end directly to your computer (you don’t want to use the 60w charger), or you can use a power adapter to plug into a power outlet to beats the flex charger.
- A USB-C adapter is available from any electronics store. On one end, it plugs into the wall, and on the other, it supports USB-C connections in addition to USB ports.
- For a full charge, keep these connected for roughly 90 minutes. You can listen for approximately 1.5 hours after a quick 10-minute charge. About 12 hours pass between charges.
- The LED on your Beats Flex headphones will flash red as they charge. The LED will turn white when they are fully charged.
How to Reset Your Beats Flex?
Sometimes a simple reset will solve charging issues and Bluetooth connectivity issues to beats the flex charger.
In order to reset your Beats Flex, you just need to:
- The volume down and power buttons should both be pressed and held down. Spend 15 seconds doing this.
- When the LED indicator light starts to flash, release both buttons. Your earbuds have just been reset. They can now be paired with your chosen device once more.
What Charger Does Beats Flex Charger Use?
A USB-C charging cable is used by the Beats Flex charger. Your new Beats Flex will come with a cable.
However, you can find a decent one online for $10–$15 if you want to add a second one or need to purchase a replacement.
These industry-standard connectors have a simple “up” orientation, which makes it simple to plug them in and let your device charge.
Can I Charge My Beats Flex With My Phone?
You cannot use the power from your iPhone to recharge your Beats Flex because they need a USB-C connector.
iPhones cannot take The Beats Flex’s jack will not accept USB-C cables or their lightning cables.
Can You Charge Beats Flex With An IPhone Charger?
iPhones come with wall chargers that have type USB-C connectors.
The Beats Flex’s cable can be switched out for your iPhone’s cable thanks to these connectors, which encourage fast charging for iPhones.
All that is required is for your power source to be connected to the wall adapter.
How Do I Charge My Beats Flex Using My Computer?
Does your computer have a built-in USB-C port? Or did you install one on your own (which, incidentally, you can totally do on a vintage PC that wasn’t built with a USB-C port)? If so, after turning on your computer, you can use the USB-C connector to connect your Beats Flex to it and charge the battery.
What Will Help My Beats Flex Charger the Fastest?
For devices like the Beats Flex, which offers 12 hours of playback time after a full charge—not bad at all—USB-C connectors are designed to provide quick charging speeds.
The Beats Flex can be charged from zero to full capacity when the USB-C is connected to a stable power source in about 90 minutes.
If you’re pressed for time, the Beats Flex will provide 90 minutes of playback after a 10-minute Fast Fuel charge.
You won’t have to wait for hours for these earbuds to recharge because they are made to do so quickly.
What Should I Do If My Beats Flex Aren’t Charging?
If your Beats Flex charger is fully charged, requires some charging, or is completely dead, you should be able to tell by looking at the LED indicator light.
Here’s how you can tell where your battery life is on the Beats Flex charger:
- More than an hour’s worth of battery life is indicated by the color white.
- A red battery life indicator means the battery life is about to run out.
- Your Beats Flex battery needs to charge right away if it is blinking red. It is almost dead.
Checking the USB-C connector’s condition should be your first step if you are having trouble getting your Beats Flex to charge.
The internal wires may become harmed if the outer protective layer breaks.
Therefore, the Beats Flex cannot be charged using your connector cable.
Check to see if it works by switching it out for another USB-C cable.
Repair your Beats Flex charger and the chosen listening device if it still doesn’t work.
You will need to tell your device to “forget” your Then, repeat these steps to repair your Beats Flex.
Conclusion
Beats Flex charger differs from some other Beats in that it uses a USB-C connector cable rather than a lightning cable.
Since so many devices, such as computers and iPhone wall adapters, can accept USB-C connectors, it isn’t really a big deal.
Your Beats Flex will be fully charged and ready to use in no time thanks to faster-charging speeds made possible by USB-C connectors.
